DeLonghi MAGNIFICA EVO ECAM29.6 EX:2 Serie Instrucciones De Uso página 26

Ocultar thumbs Ver también para MAGNIFICA EVO ECAM29.6 EX:2 Serie:
Idiomas disponibles

Idiomas disponibles

Problem
The milk presents large bubbles or splashes
from the spout(E3) , or is under-frothed.
Milk-based drinks are not enabled
The cup tray on top of the machine is hot
The machine emits noises or small puffs of
steam while not in use
The machine emits puffs of steam from the
drip tray and/or there is water on the sur-
face where the machine is positioned.
De'Longhi reserves the right to modify the technical specification
and styling of its products at any moment, without compromis-
ing their functionality and quality.
Cause
Milk is not cold enough, or is not semi-
skimmed or skimmed.
Milk carafe lid dirty.
Vegetable drinks are being used.
Milk carafe missing or not correctly in place. Prepare the milk carafe and position it cor-
Several milk drinks have been prepared in
succession and the machine needs to heat
up to the ideal temperature before making
the next drinks.
Several drinks have been prepared in rapid
succession
The machine is ready for use or has just
been turned off, and a few drops of con-
densate are falling into the steamer, which
is still hot.
The drip tray grille has not been replaced
after cleaning.
26
Solution
Use skimmed or semi-skimmed milk
straight from the refrigerator (tempera-
ture about 5° C). If the result is still not as
expected, try changing the brand of milk.
Disassemble the components and clean
thoroughly as described in section "9.7
Cleaning the milk carafe after each use".
Take particular care when cleaning the milk
carafe connector (E6).
The end-result varies widely depending on
the nutritional properties of the drinks. "Baris-
ta" versions of these drinks are recommended.
rectly in the machine.
Wait until milk-based drinks are again ena-
bled on the control panel.
This is to be expected as an aspect of normal
operation: to minimize the effect, empty
the drip tray regularly.
Ensure the grille is repositioned in the drip
tray.
loading