Silvercrest SMW 800 C3 Instrucciones De Uso página 55

Ocultar thumbs Ver también para SMW 800 C3:
Idiomas disponibles

Idiomas disponibles

ATTENTION! PROPERTY DAMAGE!
Never operate the appliance in the operating mode "microwave" or
using combination cooking processes if there is no food inside.
Never operate the microwave oven when it is empty.
Never insert any foreign objects into the ventilation openings or the
door safety locks.
Do not use metallic utensils which could reflect microwaves and lead
to sparking. Do not place cans in the microwave oven.
The microwave oven may not be set up in areas with high humidity or
where moisture could collect.
Do not lean on the microwave oven door.
Insufficient cleanliness of the appliance could lead to the destruction
of the upper surfaces, which themselves affect its useful lifespan and
could possibly lead to dangerous situations.
Do not move the microwave oven when it is in use.
Earthing information/
installation
This appliance must be earthed. This appliance
is to be connected only to a correctly earthed
power socket. An individual circuit solely for the
connection of the microwave is recommended.
DANGER – ELECTRIC SHOCK!
Improper use of the earthing connector could
increase the risk of an electric shock.
NOTE
If you have any questions about earthing or
the instructions on the use of this electrical
appliance, please consult an electrician or
a maintenance technician.
Neither the manufacturer nor the dealer can
accept liability for damage to the microwave
oven or injury to persons resulting from failure
to comply with the instructions for electrical
connection.
GB │ MT
52 
Radio interference
with other appliances
The operation of the microwave may cause interfer-
ence on your radio, television or similar appliances.
If such interference occurs, it can be reduced or
corrected by the following remedial measures:
Clean the door and the sealing surface of the
microwave.
Reorient the receiving antenna of the radio or
television.
Position the microwave in a different location to
the receiver.
Move the microwave away from the receiver.
Plug the microwave into another wall socket.
The microwave and the receiver should be
connected to different circuits.
SMW 800 C3
loading