Idiomas disponibles
Idiomas disponibles
Electrical Connections
Caution:
e This product is designed to operate with a 12 V DC, negative ground battery system.
e To prevent damage to the unit, be sure to follow the connection diagram below.
e Remove approximately Ys" (5 mm) of protective covering from the ends of the leads before connecting.
© Do not insert the power connector into the unit until the wiring is completed.
e Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
e Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
Supplied hardware
Power connector
MEN
O Wiring Diagram
Preamp out connector (front)
Preamp out connector (rear)
A
GE
L (White) 7
R (Red)
Antenna
(To motor antenna)
This lead is not intended for use with switch actuated
power antenna.
Amp. relay contro! power lead
This lead is for connection to the power amplifier.
(Gray)
(Green/black
black
(—
(+)
(=)
(+)
(=)
(+)
stripe) (—)
(+
Speaker lead
(White/black
(Green)
(Violet/
stripe)
Left speaker
Right speaker
Left speaker
Right speaker
(front)
(front)
(rear)
(rear)
e
[ou |
