Panasonic EYSDA Serie Manual De Instrucciones página 18

HOW TO USE
Checking Fastening Status
This unit notifies you of the work status
with the detection lamp.
■ Fastening OK
When the clutch activates and the screw
is normally fastened, the detection lamp
lights up in green to tell you that the
screw has been normally fastened.
OK
■ Fastening NG (NOK)
The tool has stopped without the clutch
activated not satisfying the determination
criteria.
The red detection lamp lights up in red
to tell you that the screw has not been
properly fastened.
NG
18
EN
(cont.)
Detection lamp
Solid green
Detection lamp
Solid red
Finishing Work
Set the forward/reverse
lever to the trigger switch
lock position.
Set it to the "○" position.
Turn OFF the power switch
of the power adapter,
or
disconnect the power plug
from the outlet.
Turn OFF the power switch.
Power switch
Disconnect the power plug from the
outlet.
Power plug
Example: For Europe
○ position