YATO YT-82555 Manual Original página 15

EN
ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of con-
centration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the
plug in any way. Do not use any plug adapters with earthed power tools. An unmodifi ed
plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Ground-
ing the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture.
Water and moisture that gets inside the power tool increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug
the power plug from the power outlet. Avoid contact of the power cable with heat, oils,
sharp edges and moving parts. Damage or entanglement of the power cord increases the
risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work
outside closed rooms. The use of an extension cord adapted for outdoor use reduces the
risk of electric shock.
When using a power tool in a humid environment is unavoidable as a protection
against supply voltage use a residual current device (RCD). The use of RCD reduces
the risk of electric shock.
Personal safety
Stay alert, pay attention to what you do and keep common sense while working with
the power tool. Do not use a power tool when you are tired or under the infl uence of
alcohol or medication. Even a moment of inattention while working can lead to serious
personal injury.
Use personal protective equipment. Always wear eye protection. The use of personal
protective equipment such as dust masks, anti-slip safety shoes, helmets and hearing pro-
tection reduce the risk of serious personal injury.
Prevent accidental operation. Make sure that the electric switch is in the "off " position
before connecting to the power supply and / or battery, lifting or moving the power
tool. Moving the power tool with the fi nger on the switch or powering the power tool, when
the switch is in the "on" position can lead to serious injuries.
Before turning on the power tool remove any keys and other tools that were used to
adjust it. The key left on the rotating parts of the power tool can lead to serious injuries.
Do not reach and do not lean too far. Keep the right attitude and balance all the time.
This will allow easier control over the power tool in case of unexpected work situations.
Dress accordingly. Do not wear loose clothing or jewelry. Keep your hair and clothing
away from moving parts of the power tool. Loose clothing, jewelry or long hair can be
caught by moving parts.
If the devices are fi tted for the connection of dust extraction or dust collection, make
sure that they are connected and used properly. The use of dust extraction reduces the
O R I G I N A L I N S T R U C T I O N S
15