Porsche Classic Manual Del Usuario página 13

Technical Data
Input (EU and UK): 220 - 240 V/AC 50 Hz, 0.8 A max.
Input (US and Canada): 100 - 120 V/AC 60 Hz, 1.6 A max.
Input (Japan): 100 - 120 V/AC 50 Hz, 1.6 A max
Output: 6 V/DC, 5.0 A; 12 V/DC, 0.8 A / 5.0 A
Min. battery voltage: 6 V battery: 3.7 V /
12 V battery: 7.5 V
Backfeed current: < 5 mA
Ripple: +/- 0.3 V
Ambient temperature: -20°C to +50°C
Cable: PVC; Easy to handle down to -20°C
Charging Type: 8-step, fully automatic charging cycle
Battery type: 6 V and 12 V; Lead-acid of Wet, MF,
VRLA, AGM or GEL
Battery Capacity: 6 V: 1.2 Ah to 77 Ah;
12 V: 14Ah to 120 Ah
Dimensions: 135 (L) x 100 (W) x 155 (H) mm
Ingress protection: IP20
Weight: 650 g
WARNINGS
1. Use this charger with 6 V or 12 V Lead Acid
battery only.
2. Ensure that your battery is compatible with the
charger. It must be a 6 V / 12 V Lead-acid, Wet,
MF, VRLA, AGM or GEL. Refer to the specificati-
ons in the „Technical data" section.
3. Do not use the charger to charge batte-
ries with other operating
DO NOT charge Li-ion batteries!
4. For indoor use ONLY!
5. Protect the product from water and other liquids,
and moisture.
6. Do not charge non-rechargeable batteries.
7. During charging the battery must be placed in a
well-ventilated area.
8. Do not dispose of the torch battery in the house-
hold waste. Return it to a designated collection
point.
9. This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision.
10. Children should be supervised to ensure that they
do not play with the appliance.
11. If the mains cable is damaged, it must be replaced
by a cable of the same type and the same specifi-
cations.
12. Disconnect the supply before making or breaking
connections to the battery.
13. The battery terminal not connected to the chassis
has to be connected first. The other connection is
voltages and to be made to the chassis, remote from the batte-
ry and fuel line. The battery charger is then to be
connected to the supply mains.
14. After charging, disconnect the battery charger
from the mains supply. Then remove the chassis
connection and then the battery connection.
15. This marking indicates that this product should not
be disposed with other household wastes throug-
hout the EU. To prevent possible harm to the envi-
ronment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return
your used device, please use the return and col-
lection systems or contact the retailer where the
product was purchased. They can take this pro-
duct for environmental safe recycling.
13