Porsche Classic Manual Del Usuario página 10

Torch function
Setup
1. Remove the cover on the red terminal by using
a screwdriver to remove the lid of the battery
compartment and take out the button cell battery.
2. Remove the insulation material underneath the
button cell battery. The contact spring must be
exposed.
3. Insert the button cell into the recess in the correct
position (+) symbol facing upwards and replace
the cover.
Notice: Do not overtighten the screw to prevent product damage.
Warning: Never look directly into the torch beam, as this may cause eye damage.
10
Changing the battery
1. First of all, remove the screw from the battery com-
partment cover of the red terminal. Use a suitable
screwdriver.
2. Remove the battery compartment cover.
3. (If a battery is in place) take out the battery.
4. Insert a new CR1632 button cell battery into the
recess. The (+) symbol on the battery must face up.
5. Put back the battery compartment cover.
6. Insert the screw and tighten it.
Wall mounting
If you wish to mount your PORSCHE Classic battery
charger on a wall, please use mounting materials
appropriate for your wall type. Use the drill template
provided (see page 99).