Safety
Safety Requirements
»
Never connect or disconnect the liquid level
sensor hub when the system is turned on.
»
Never use a liquid level sensor assembly
that is damaged. Inspect before use.
»
Never lift a reservoir by its liquid level sensor assembly.
»
Always ensure that the solvent inlet tubes, waste
outlet tube, and the sensor cables are routed in a
safe manner to reduce the risk that the solvent and
waste reservoirs tip over. It is recommended that the
optional secondary solvent containment is used.
»
Ensure that the power cord, cables, and tubing connected
to the system cannot come in contact with chemicals.
»
If spillage occurs on the liquid level sensor
assembly, immediately dry it off.
»
Always ensure that the current waste level is correct
in the Solvent Setup view after disabling Biotage
Liquid Level Sensor in the System Settings view.
»
Read and follow the safety requirements in the Biotage
Selekt Family Installation and Safety document
(P/N 417511) that is supplied with the system.
Safety in Other Languages
See "Safety Translations" on page 17.
4
®
®
Biotage
Liquid Level Sensor for Biotage
®
Selekt Family – User Manual | © Biotage 2023
®
