Administrate Reservoirs
Note: The last solvents used on the system must be miscible
with water.
1. Press Menu, Data Administration and then Reservoirs.
2. Edit or create the reservoir that you want to calibrate.
3. Press Calibrate. Read and follow the instructions that
appear on the screen; see Figure 21.
Figure 21. The first and second page in the Reservoir Calibration Wizard.
Transfer Reservoirs
Reservoirs added on one system can be transferred to other
Selekt and Selekt Enkel systems using a USB memory device or
network share (if enabled).
Note: When exporting reservoirs from the system, they are
saved at biotage\selekt\common\reservoirs\ (on USB) or
\common\reservoirs\ (in network share folder). Ensure to use
the same location when importing reservoirs to the system.
Note: If remote control is enabled on your system, it is not
possible to export and import reservoir types using a USB
memory device on a remote client.
1. Press Menu, Data Administration and then Reservoirs.
2. Press Transfer. The Transfer Reservoirs view opens; see
Figure 22.
3. If applicable, select whether you want to transfer reservoirs
from/to a USB memory device or the network share folder
from the Available on drop-down list.
10
4. Select the reservoir(s) to be transferred.
To only list calibrated reservoirs, enable the Only
Calibrated option.
To transfer all listed reservoirs, enable the Select All option.
Note: If a reservoir with the same name and identical
settings exists on the system and the USB/network share,
it is grayed out and cannot be selected.
5. Transfer the selected reservoir(s) by pressing Selected.
6. If a reservoir with the same name but different settings
exists on the destination location, the Reservoir Already
Exists dialog opens (see Figure 23). The settings for both
reservoirs are listed. Select whether to replace the reservoir
in the destination (Replace), keep both (Create Copy), or
keep the reservoir in the destination (Skip).
Figure 22. The Transfer Reservoirs view. In this example, the selected
reservoirs will be copied from the system to the connected USB memory
device when Selected
is greyed out (and cannot be selected) as its settings are identical on the
system and the connected USB memory device.
Figure 23. The Reservoir Already Exists dialog appears when a reservoir
with the same name but with different settings exists in the destination
location. In this example, the reservoir "2000 mL Clear Glass 38-430" on
the system has a newer calibration than the one on the connected USB
memory device.
Biotage
Liquid Level Sensor for Biotage
®
is pressed. The reservoir "2000 mL Amber Glass"
Selekt Family – User Manual | © Biotage 2023
®
