Enlaces rápidos
Manuales relacionados para Biotage Selekt Family
Resumen de contenidos para Biotage Selekt Family
- Página 1 Biotage Liquid Level Sensor ® for Biotage Selekt Family ® User Manual Patent Pending © Biotage 2023...
- Página 2 Refill a Solvent and Empty Waste Refill a Solvent Reservoir Empty the Waste Reservoir Replace a Solvent or Waste Reservoir Maintenance and Troubleshooting Maintenance Troubleshooting Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 3 The software comes with two preconfigured reservoirs smaller than allowed. This is useful if e.g. the operator by supplied by Biotage. Custom reservoirs can be defined and mistake is using a waste reservoir that is smaller than the one calibrated on one system and transferred to other Selekt and that has been assigned to the solvent inlet in the software.
- Página 4 RF Type (Sensor) Transceiver Operating Frequency 57 to 64 GHz Range Radar Peak Output 18 dBm Power Sensor Cable Length 1.8 m (70.9") Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 5 Changes or modifications made to this equipment not expressly Labels Used on the Biotage approved by Biotage may void the FCC authorization to operate ® this equipment. Liquid Level Sensor Kit Note: This equipment has been tested and found to comply...
- Página 6 Selekt Family Installation and Safety document (P/N 417511) that is supplied with the system. Safety in Other Languages See “Safety Translations” on page 17. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 7 Connect the Liquid Level Sensors to the System Connect the Liquid Level Sensors to the System Prepare the System 2. Attach the solvent inlet/waste outlet tube to the tube Warning holder; see Figure 4. Two tube inserts are required to attach »...
- Página 8 Solvent tube Waste tube Figure 12 . The solvent and waste clips. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 9 2. Insert the universal cap adapter through the hole; see A and B in Figure 15. 3. Attach the 38-430 cap supplied by Biotage to the universal cap adapter; see C in Figure 15. 4. Tighten the 38-430 cap and attach the whole cap assembly to the reservoir.
- Página 10 Figure 17. The System Settings view when the Biotage Liquid Level ® Sensor option has been enabled. An information dialog opens, showing which sensors that are connected to the system. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 11 » The software comes with two preconfigured reservoirs supplied Description: A description of the reservoir, e.g. material, by Biotage that cannot be edited or deleted. To add, edit, manufacturer, and part number. (Optional.) » calibrate, transfer, and delete user-defined reservoirs, press Calibrated: The date and time when the reservoir Menu, Data Administration and then Reservoirs (see Figure 18).
- Página 12 USB from/to a USB memory device or the network share folder memory device. from the Available on drop-down list. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 13 Assign Solvents and Reservoir Types Assign Solvents and Reservoir Types Prepare the System Warning » If using the optional secondary solvent containment on the top of the system, it must be empty when using columns larger than 400 grams. Note: For the liquid level sensors to work, they have to be used with reservoirs that have been calibrated.
- Página 14 Here is also the hub’s serial number listed. Sensor failure. The sensor must be disconnect from the liquid level sensor hub. (The user is notified.) Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 15 Solvent and Waste Estimations and Notifications Solvent and Waste Estimations and Notifications Setup and Run a Purification Run Estimation Solvent and Waste Notifications You can at any time view the estimated solvent consumption When using the liquid level sensors for solvent and waste and the required waste capacity: monitoring: »...
- Página 16 When the liquid level sensor assembly is attached to the reservoir again (with the sensor closed), the amount of liquid available in the reservoir is automatically updated in the software. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 17 Maintenance and Troubleshooting Maintenance and Troubleshooting Maintenance Warning » If spillage occurs on the liquid level sensor assembly, immediately dry it off using a clean, non-abrasive cloth. Clean the Tube Holder The tube holder must be cleaned when spillage occurs or before moving it to a reservoir with a different solvent.
- Página 18 The user manuals supplied with the systems are also available in Chinese (P/N 416183ZH/417510ZH), Japanese (P/N 416183JP/417510JP) and German (P/N 416183DE/417510DE) at www.biotage.com. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 19 キットに使用されているラベル Liquid Level Sensor キットのラベルに使用されている全 この送信機を他のアンテナや送信機と同じ場所に設置したり、 Biotage ® ての記号は、 Biotage Liquid Level Sensor に関する以下の記号を 一緒に使用したりしないでください。 ® 除き、 「Biotage Selekt Family Installation and Safety Document」 ® 安全要件 （P/N 417511） で参照できます。 » システムの電源が入っているときは、 絶対に液体レベルセンサ 本製品は、 日本の総務省によって承認されています。 以下の ーのハブを接続したり、 取り外したりしないでください。 » 「Biotage Liquid Level Sensor の総務省技適マーク」...
- Página 20 Biotage Liquid Level Sensor Cet équipement est conforme aux limites d’exposition aux ® Tous les symboles utilisés sur les étiquettes du kit Biotage rayonnements ISED établies pour un environnement non ® Liquid Level Sensor peuvent être consultés dans le document contrôlé.
- Página 21 Liquid Level Sensor ® TV con experiencia para obtener ayuda. Todos los símbolos utilizados en las etiquetas del kit Biotage ® Liquid Level Sensor pueden consultarse en el documento Este equipo cumple con los límites de exposición a la radiación Biotage Selekt Family Installation and Safety (ref.
- Página 22 Selekt Family Installation and Safety ® Störungen in einer häuslichen (Wohn)-Installation bieten. (Art.-Nr. 417511), das mit dem System geliefert wird. Dieses Gerät erzeugt, verwendet und strahlt möglicherweise Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 23 “Biotage Selekt Family User Documentation” a pagina 16. ricezione radiofonica o televisiva, il che è rilevabile accendendo ® e spegnendo l’apparecchiatura stessa, si consiglia di adottare Uso previsto una o più...
- Página 24 A digitalt udstyr i overensstemmelse med del 15 i FCC-reglerne. Disse grænser er beregnet til at give rimelig beskyttelse mod skadelig interferens ved betjening af udstyret Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 25 ® i vyn System Settings (systeminställningar). Ändringar eller modifieringar av denna utrustning, som » inte uttryckligen har godkänts av Biotage, kan leda till att Läs och följ säkerhetsföreskrifterna i dokumentet FCC-godkännandet för användning av utrustningen upphävs. Biotage Selekt Family Installation and Safety ®...
- Página 26 Safety -asiakirjan (P/N 417511) mukana toimitetut Laitteeseen tehdyt muutokset, joita Biotage ei ole turvallisuusvaatimukset ja noudata niitä. nimenomaisesti hyväksynyt, voivat mitätöidä FCC:n tälle laitteelle myöntämän käyttöoikeuden. Biotage Liquid Level Sensor for Biotage Selekt Family – User Manual | © Biotage 2023 ® ®...
- Página 27 Beoogd gebruik » Richt of verplaats de ontvangstantenne opnieuw. Biotage Liquid Level Sensor van Biotage is uitsluitend bedoeld ® » voor gebruik met de systemen Biotage Selekt en Biotage Vergroot de afstand tussen de apparatuur en de ontvanger.
- Página 28 Part Number: 419144-A © 2023 Biotage. All rights reserved. No material may be reproduced or published without the written permission of Biotage. Information in this document is subject to change without notice and does not represent any commitment from Biotage. E&OE.