Idiomas disponibles
Idiomas disponibles
MM phono pre-amplifier
Gain: 34dB +/- 2dB
Output voltage: > 220 mV/1kHz at 5mV/1kHz input
Input impedance: 47kOhms/100pF
RIAA-equalisation curve accuracy: 20Hz-15kHz / max. 2db.
Bluetooth 5 Module (Pre-installed in TT Gen 1)
Bluetooth version: 5.0
Normal or True Wireless (stereo) pairing
3.5 mm port for digital optical and analogue signals
µUSB port for 5V power
Dual mode: Switch between Transmitter (TX) and Receiver (RX) - Default in TT should be TX
Chip: Qualcomm CSR8670C
Codec: aptX LL / SBC / MP3 / AAC
Latency: Extremely low <40ms
Gold-plated contacts for perfect signal transmission
Multiple set-up options and flexible use
Multi-Configurable I2S, SPDIF Interface
Built in 16-bit Stereo Codec- 95dB SNR for DAC
D/A conversion 16 Bit / 96 kHz
A/D conversion 16 Bit / 48 kHz
Temperature range: 5 to +50 °C
Permissible relative humidity: 5 - 90%
Voltage supply: 5V
Dimensions: 33 x 62 x 12 (w x h x d in mm)
Weight: 0.02 kg
MM-Cartridge Ortofon OM 5E
Frequency range: 20-25.000Hz +3 / -3
Output voltage at 1000 Hz, 5cm/s: 4 mV
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 22 dB
Channel separation at 15 kHz: 15 dB
Tracking ability at 315Hz at recommended tracking force (typical value): 60 µm
Compliance, dynamic, lateral: 20 µm/mN
Stylus type: Elliptical
Stylus tip radius: r/R 8/18 µm
Tracking force range: 1.5-2.0 g (15-20 mN)
Tracking force, recommended: 1.75 g (17.5 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-500 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight incl. extra weight: 5 g
Cartridge weight excl. extra weight: 2.5 g
Replacement stylus unit: Stylus 5E
OM 5E features an elliptical stylus that provides balanced and distortion-free playback. Elliptical
diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to
their contoured shape. This results in better tracking and less distortion.
Materials
Glass: Tempered Optiwhite
Aluminium: AL6061 - Estimated 50% recycled content
Plastics: ABS V0+UV - 100% recycled content
Papers and Cardboards: 100% FSC Certified
Product Bags: Spunlace
Packaging Buffer: EPE
Important Safety Instructions
1.
Read these instructions – All the safety and operating instructions should be read before this
product is operated.
2.
Keep these instructions–The safety and operating instructions should be retained for future
reference.
3.
Heed all warnings–All warnings on the appliance and in the operating instructions should be
adhered to.
4.
Follow all instructions – All operating and use instructions should be followed.
5.
Do not use this apparatus near water – The appliance should not be used near water or moisture –
for example, in a wet basement or near a swimming pool, and the like.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.
Unplug the apparatus during lighting storms or when unused for long periods of time.
14.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15.
-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of non-insulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no
user-serviceable parts inside. Refer servicing to qualified personnel.
-The exclamation point within and equilateral triangle is intended to alert the user to the
presence of important operating and maintenance instructions in the literature accompanying
the appliance.
16.
The mains plug is used as the disconnect device.The socket-outlet shall be installed near the
equipment and shall be easily accessible.
17.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall not be placed on apparatus.
18.
The use of the equipment in moderate climate.
19.
The ventilation should not be impeded by covering the ventilation openings with items such as,
newspapers, tablecloths, curtains, etc.
20.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
21.
The symbol with ~ Indicates AC voltage.
22.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so. Changes or modifications not approved by
Transparent Sound AB could void the user's authority to operate the equipment.
Symbols
Caution: To prevent the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
This appliance may not be treated as regular household waste. Management of WEEE
(waste electrical and electronic equipment) is applicable in the Member States of the
European Union and other European countries with
individual national policies on the management of WEEE. If you need more
information on the collection, reuse and recycling systems, please contact your local
or regional waste administration.
The product complies with the following European Directives:
• Ecodesign requirements for Energy-related Products Directive (EC) 278/2009
• Radio Equipment Directive (RED) 2014/53/EU
• The Low Voltage Directive (LVD) 2014/35/EU
• Safety Standard for ITE and AV Equipment. Conforms to UL62368-1 for North
America and certified to Canada IEC62368-1.
The product complies with RoHS (Restriction of Hazardous Substances Directive)
2011/65/EU & 2015/863/EU (RoHS 3)
Radio Frequency Interference Requirements - FCC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please pay attention that changes or modification not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
The product complies with safety and EMC (Electro Magnetic Compatibility) approval
for electrical products sold on the Japanese market. The applicable law is the DENAN
Act (Electrical Appliance and Material Safety Act) of Japan.
Korea Communication Commission: signifies compliance with Korea's product safety
requirements for electrical and electronic equipment and is issued by Korea-based
certification body that have been approved by the Korea Standards Association.
UK Conformity Assessed (UKCA) marking is a conformity mark that indicates
conformity with the applicable requirements for products sold within Great Britain
(England, Scotland and Wales).
The UKNI marking is a conformity marking for products placed on the market in
Northern Ireland which have undergone mandatory third-party conformity
assessment by a notified body.
IEC 60417 : To identify electrical equipment designed primarily for indoor use.
This product complies with:
ETLus: UL62368-1
FCC SDOC: FCC PART15B
IC: ICES-003
CE-LVD: EN62368-1
CE-EMC: EN55032 + EN55035 +IEC EN61000-3-2 +IEC EN61000-3-3
UKCA: BS EN62368-1+BS EN55032/35 +BS EN61000-3-2/3
PSE: J62368
7
