Idiomas disponibles
Idiomas disponibles
Maintenance
Your record player requires little or no regular maintenance. Remove dust gently with the included cloth
(42) slightly moistened. Never use a dry cloth because this will create static electricity which attracts
more dust.
Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage
to rubber parts. It is recommended to fit the cartridge cover (37) before cleaning or maintenance is
carried out to avoid damage.
If the player is not used over a long period of time the rubber belt (45) can be removed to prevent
unequal stretching.
It is recommended to change rubber belt every 1-2 years to maintain a consistent playback. Boiling the
old rubber belt in hot water can regain its strength as it will shrink a bit.
FW Version / FW Upgrade
The firmware (FW) of your TT electronics can be updated over time.
You can check your FW version by clicking the FW button (61) on the back. The LED on the tonearm base
will then signal with a number of blinks to indicate the FW version. Version 01 is one blink, V02 is two
blinks and so on.
If you have been in contact with the Transparent support team and received a new FW file, and you have
it on a USB-A stick:
•
Power on your turntable and insert the USB stick in the USB-A socket (63) in the back.
•
Press and hold the FW button. Release the button when the LED starts blinking (after around 5
seconds). Now the new FW version will upload to the turntable.
•
Important: do NOT power off your turntable during the FW upgrade as it might damage the
internal memory.
•
After the LED has stopped blinking you can eject your USB stick and if you want check the new
FW version with a click.
HW Upgrade
Transparent™ lives by a circular design philosophy. A big part of that is about trying to prepare our
products for any future scenario, so the main product does not become obsolete, but that it can be
upgraded and improved over time as technology evolves.
Apart from the cartridge and headshell that has been already described, it is quite likely that a new
wireless module would be needed some years after the first generation TT was shipped.
The wireless module compartment (65) has a silicon holder (56) that holds the Bluetooth module (52).
If you wish to upgrade to a new wireless module, it is likely that Transparent offers upgrades, visit our
website at https://transpa.rent and look for upgrades.
If you obtain an upgrade from Transparent it is likely it comes with a new silicon holder and perhaps new
cables. In this case you simply eject the whole silicon holder and insert the new one, make sure the
cables plug in properly during this operation.
There might also be 3rd party wireless transmitters that can be powered by USB 5V and has a line in
socket. Feel free to try this and use for example a double sided pad to fix the 3rd party module in the
compartment, if it fits.
Disassembly
Your Transparent Turntable has a completely modular design. If any part would need service or an
upgrade, this should be doable by using the assembly tool (39) attached to the bottom side of the E box.
All screws in the TT are operable by either end of this tool.
Before commencing any disassembly work make sure to unplug the power cable and music cables.
As described in the dust cover section, the hinges and pillars are dismantled by hand. After this you can
release the rest of the components by using the assembly tool.
Important note: We do not recommend opening of the e box unless you have professional experience, or
by guidance by the Transparent support team. You might risk damaging sensitive components or if the
power cable is still plugged in there is risk for electrical shock!
All disassembly activities are carried out at your own risk and will void any warranty.
Recycling
If needed, the Transparent Turntable can be completely dismantled into individual materials (except for
the circuit boards, that at the time of writing still need to be soldered together).
If you end up in a situation where you need to discard outdated or broken parts, make sure to sort and
recycle them in their respective waste stream in your local area. If in doubt, get in touch with our support
team on [email protected]
Warranty
Transparent offers a 2 year warranty as a standard. Please consult your local dealer or
https://transpa.rent for further assistance.
Scan for Traceability
Do scan your QR code sticker. Your Transparent Turntable has a unique serial number that will lead you
to several product specific discoveries online. You might find an interactive CO2 impact tool to further
dive into the traceability of your TT. You might find product and generation specific advice about
upgrades and service.
Service and Support
Get in touch with us over email on [email protected] with any questions you might have.
Contact
Transparent Sound AB
Döbelnsgatan 47
113 52 Stockholm
Sweden
https://transpa.rent
6
Designed and developed by Transparent™ | Stockholm, Sweden
52
56
Trace / Learn
S/N: XXXX
/ Register
Technical Specifications
General
Nominal speeds: 33 ⅓ and 45 RPM
Speed variance: 33: ±0.70% 45: ±0.60%
Wow and flutter: 33: ±0.25% 45: ±0.25%
Signal to noise: ≥ 70dB at 1kHz, 0dB A-weighted
Tracking force : 1.75gram
Effective tonearm mass: 13.5g
Effective tonearm length: 220mm
Overhang: 19.5mm
Max power consumption: 15W
Dimensions (W x H x D): 410 x 125 x 320 mm
Weight: 6,5kg
Dimensions packaging (W x H x D): 580 x 240 x 460mm
Weight incl. packaging: 7,0kg
Rated input voltage: 100~240Vac, @ 50/60Hz.
61
63
65
39
