Whirlpool GLADIATOR FREEZERAT Manual De Uso Y Cuidad página 10

Idiomas disponibles

Idiomas disponibles

Adjusting Controls
The settings
indicated
in the previous
section
should
be correct
for
normal
household
usage. The controls
are set correctly
when milk or
juice is as cold as you like and when ice cream is firm.
If the temperature
is too warm or too cold in the lower or upper
compartment,
first check the air vents to be sure they are not
blocked.
If you need to adjust temperatures,
use the settings listed in the chart
below as a guide. Wait at least 24 hours between
adjustments
and
then recheck
the temperatures.
CONDITION/REASON:
ADJUSTMENT:
LOWER COMPARTMENT
section
Adjust LOWER
too warm
COMPARTMENT
Control
- Door opened
often,
large amount
toward
coldest.
of food added
or room temperature
very warm
UPPER COMPARTMENT
section
too warm
- Door opened
often, or large
amount
of food
added or very cold
room temperature
(can't cycle often
enough)
If in Refrigerator
Mode,
adjust UPPER
COMPARTMENT
Control
toward
coldest.
If in Freeze mode, adjust
LOWER COMPARTMENT
Control
toward
coldest.
LOWER COMPARTMENT
section
too cold
- Controls
not set correctly
for your
conditions
Adjust
LOWER
COMPARTMENT
Control
toward
cold.
UPPER COMPARTMENT
section too
cold
- Controls
not set correctly
for your
conditions
If in Refrigerator
Mode
adjust UPPER
COMPARTMENT
Control
toward
cold.
If in Freeze mode, adjust
LOWER COMPARTMENT
Control
toward
cold.
UPPER COMPARTMENT
FEATURES
To Remove and Replace the Shelf:
1.
Remove the shelf by lifting the entire shelf slightly
and moving
it
all the way to the left-hand
side. Tilt the right-hand
side up and
out of the shelf supports.
2.
Replace the shelf by inserting
the left-hand
end all the way into
the shelf supports.
Then, lower the right-hand
end of the shelf
and insert it into the shelf supports.
NOTE: The shelf should
lower slightly
and lock into place. If the shelf
does not appear stable,
make sure both ends of the shelf are
inserted
into the shelf supports.
LOWERCOMPARTMENT
FEATURES
For storage
flexibility,
the shelves in your convertible
refrigerator/
freezer are adjustable.
Adjust the shelves to different
heights
and
store similar foods together.
This reduces
the time the door is open
and saves energy.
Half-width Shelf/Frame
To Remove and Replace a Shelf/Frame:
1.
Remove
the shelf/frame
by tilting
it up at the front and lifting it
out of the shelf supports.
2.
Replace the shelf/frame
by guiding
the rear shelf hooks into the
shelf supports.
Tilt the front of the shelf up until rear shelf hooks
drop into the shelf supports.
Check to make sure that the shelf is
securely
in position.
Full-width Shelf
To Remove
and Replace the Shelf:
1. Remove all items from the shelf. Remove the shelf by raising the
front and pulling it forward.
2. Replace the shelf by lifting the front while sliding the shelf back
until it locks into )lace.
L__
\
Half-width
Wire Basket
To Remove
and Replace the Basket:
1. Remove all items from basket. Remove the basket by lifting the
front out of the slides, then lifting the basket out.
2. Replace the wire basket by lowering the basket into the slides
then pushing the basket backward until it is under the shelf.
To Remove
and
Replace the Upper Compartment
Floor:
1.
Remove
all items from the compartment
floor.
2.
Remove the floor by raising the front and lifting it out.
3.
Replace the floor by inserting
the two rear tabs into the holes in
the rear of the lower compartment.
Lower the floor onto the liner
of the lower compartment.
10
loading