Idiomas disponibles
Idiomas disponibles
4.2.2 Clear DTC
Select [Cear DTC] and press [ENTER], the system will
switch to the screen as shown on right side.
Select one desired item and press [ENTER], a prompt
message will appear on the screen, as shown on the right
side.
Press [ENTER] to erase DTCs, and if successfully,
"Succeed" will be shown on the screen.
Press [ESC] to exit and return to the Function screen.
If it failed to communicate with ECU, a screen will appear
as shown on the right side.
You can use [LEFT] [RIGHT] button to view other data of
vehicle. Press [ENTER] to return to Diagnostic Menu. N/A
means not available on this vehicle, INC means
incomplete or not ready, OK means Completed or Monitor
OK.
4.2.3 Data Stream
Press [UP] [DOWN] button to select [Date Stream] in main
Menu screen and then press [ENTER] button to confirm,
the screen will appear as shown on the right side.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
7
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
