KitchenAid 5KSB4026EHI Manual Del Propietário página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
PRODUCT USAGE (CONTINUED)
4.
When finished, press (
NOTE: For variable speeds (from 1 to 5), the Blender will stop automatically after
3 minutes of run time. For preset recipe program, the Blender will automatically stop
blending once the cycle is complete.
5.
Pulse mode: Press (
interval of time. When finished, release the Control Dial to stop.
6.
Tamper accessory
towards the blade. Then, place the Lid Centre cap back before resuming blending.
NOTE: If blending hot liquids and ingredients, start on a low speed and then ramp up to the
desired speed. Use variable speed and run for 1-2 minutes.
IMPORTANT: Allow the Blender to fully stop before removing the Lid, Blender Jar, or pouring
out blended ingredients.
CARE AND CLEANING
USING THE CLEAN FUNCTION
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
1.
Fill half of the Jar with warm water and add 1 or 2 drops of dish-washing liquid. Place the
Jar on the Base. Secure the Lid and Lid Centre Cap.
2.
Turn from (O) to (
contents and rinse with warm water and dry thoroughly.
NOTE: Do not immerse the Blender Base or Cord in water. Do not use abrasive cleansers
or scouring pads to avoid scratching.
3.
Unplug the Blender before cleaning. Wipe clean the Base, Power Cord and the Gear
Assembly of the Citrus Press with a warm, damp cloth and dry with a soft cloth.
4.
Dishwasher-safe, top rack only: Personal Jar, Small Batch Jar, Lids, Blade Assembly,
Reamer, Juice Container, Pulp Basket and Lid Centre Cap, Tamper
Blender Jar and Glass Jar can also be washed in the bottom rack.
ELECTRICAL EQUIPMENT WASTE DISPOSAL
DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
*Available as an optional accessory.
) to stop. Unplug before removing the Blender Jar.
). Turn and hold the Control Dial from (O) to (P) as per desired
: Remove the Lid Centre Cap only. Stir or press contents down
*
). Press (
) to start. When cycle ends, remove the Jar and empty
*
.
. The various parts
7
loading

Este manual también es adecuado para:

5ksb40 serie