Idiomas disponibles
Idiomas disponibles
XQB60-91BF
MANUAL
10/22/01
11:42
AM/_ge
17
Steps
for
the Wash
Process:
1. Turn the power 'On".
2. Fill the detergent/softener dispenser,
3. Selecting the cycle:
Note:
If you choose to keep the "Auto
Presets" of the cycle, skip to step # 5, If you
choose to change
any or all of the preset options,
continue
with step # 4, There may
be some restrictions
when choosing
selected options,
Manually
Selecting Your Options
A. When selecting
wash cycle options,
please refer to "Wash
Cycle
Options"
section
of page 11 for details.
B, When
selecting
delay start, please refer to "Delay
Start Button" section
of page 15 for details.
C. When selecting
current level, please refer to "Selecting
Current
Level"
section of page 12 for details.
D, When selecting
water
level, please refer to "Selecting
Water Level"
section of page 13 for details.
E, When
selecting
temperature,
please refer to "Selecting
Wash/Rinse
Temperature"
section of pages 14 for details.
F, Once you have selected proper
options
go to step # 5.
5. Load clothes into the wash tub.
6. Close the washer
door properly,
7, Press the "Start/Pause"
button to begin the wash process.
Norma
Operating
Sounds
The
following
sounds
are
normally
heard
during
the
operation
of
the
washer:
• Tumbling sounds:
This is normal
as the heavy wet clothes in the Washer
are
continuously
being tossed around.
• Air rushing
noise: This happens
when the Washer
tub spins at very high RPM,
• Wash and Rinse cycles going
on and off will also make clicking
sounds.
16
