Idiomas disponibles
Idiomas disponibles
XQB60-91BF
MANUAL
10/22/01
11:42
AH/_ge
15
iiiiiiiiiiiiiiiiiii
Selecting
Wash/Rinse
Temperature:
When
you turn the power
"ON",
the initial
temperature
is
set at "Cold/Cold"
position.
Press the "Temp Select Button" to select the proper temperature
option,
For your convenience,
there are three temperature
options:
Cold/Cold,
Warm/Cold
and Hot/Cold,
COLD/COLDII_
WARM/COLD_
HOT/COLD_
Always
refer to the label on the garment
for proper
temperature
that is recommended
by garment
manufacturers
See the reference
chart below
to select proper
temperature
for the fabrics
WASH/RI
NSE
Cold/Cold
Warm/Cold
Hot/Cold
TYPES
OF FABRICS
Non-colors
Fabrics, lingerie
with light or normal
soil
clothes & special care fabrics
Delicate & colors Fabrics
Sturdy whites & colors
Fabrics such as work & play
clothes, soiled fabrics
Note:
When selecting
hot water
option for your load,
• Incoming
hot water must not exceed over 140 Degree [/60
Degree C.
• If the incoming
hot water temperature
exceeds over level shown above,
the display
will show 'E5"
error code and it will beep
• You must let the hot water cool down
below the temperature
level shown
above.
Once the hot water has cooled
down, you must press
"Start/Pause"
button to resume the cycle again,
Start/Pause
Button:
After selecting
your options
and closing the washer
door properly,
you need to
press the Start/Pause
button to start the washer
If you want to pause during
the cycle operation,
simply press "Start/Pause"
button.
This will stop the activity
during
the cycle operation
until you press this button
again
to resume the cycle.
14
