A3 Troubleshooting; A4 Bravofil Disposal; A5 Bravofil Labelling - Acqua Brevetti BRAVOFIL FT020 Manual De Instrucciones Para El Uso Y Mantenimiento

Filtro auto-limpiante semi-automatico
Ocultar thumbs Ver también para BRAVOFIL FT020:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Warning! In order to obtain an effective cleaning of the filter a minimum water pressure of 2 bar is required.
If necessary, during the filter cleaning operation, the shut off valve positioned downstream of the filter should
be closed.
A2.2 Inactivity
After a period of inactivity of less than 30 days carry out the cleaning operation repeatedly (4-5 times) keeping the
filter in discharge position for 30 seconds in order to allow an adequate flushing of the filter.
After a period of inactivity longer than 30 days the filter must be sanitized.
The term "inactivity period" indicate a period in which the water distribution system remains completely closed
without withdrawal from tap (e.g. during holydays).
In case the hydraulic distribution system was subjected to a cleaning and sanitization it would be necessary to include
the filter in the intervention as well. The sanitization is part of the extraordinary maintenance and it must be
performed by qualified personnel only.
The intervention of sanitization is part of the extraordinary maintenance and must be carried out by qualified
personnel. In any case please contact a Technical Assistance Centre (CAT) Acqua Brevetti s.r.l.
A2.3 Periodic checks
It is advisable to make a biannual check by an authorized technician to verify the proper operation of the equipment.
A2.4 Extraordinary maintenance
Extraordinary maintenance or repair may affect the functional and/or safety features if improperly executed: all these
operations are deliberately omitted in this manual. Hence all extraordinary maintenance and repair operations not
covered in this manual should be performed by authorized Acqua Brevetti s.r.l personnel only or by a local delegate
specifically authorized.
Acqua Brevetti s.r.l. has created and organized an efficient local technical assistance extended to the whole country
with trained technicians who are available to assist you in order to ensure the proper operation of the equipment. In
case of damages or peculiar problems please contact Acqua Brevetti s.r.l..

A3 TROUBLESHOOTING

Problem
Serious increase of the head
losses.
Leakage from the discharge valve.
Visit the Acqua Brevetti s.r.l. website
or distributors.

A4 BRAVOFIL DISPOSAL

Collect it separately from other waste. Give the equipment when it reached the end of its life to appropriate separate
waste collection centres. Before the waste disposal and anyhow in case of doubt contact your municipality Waste
Management Service for clarification.

A5 BRAVOFIL LABELLING

On the upper side of the equipment there is an identification label of the purchased product. In particular the serial
number must be copied on the warranty certificate.
Serial number
Production date (month/year)
MAN126
BRAVOFIL - ENGLISH
Cause
Filtering element dirty.
Discharge
valve
not
closed due to the presence of a
foreign body in the seat.
Filter phased-out.
www.acquabrevetti.eu
Solution
Backwash.
completely
Contact with the service center.
Contact with the service center.
for the list of the nearest authorized service centres
PAG.E-6
Tabla de contenido
loading

Este manual también es adecuado para:

Bravofil ft022Bravofil ft024

Tabla de contenido