General Power Tool Safety Warnings - Makita DTDA040 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
Maximum fastening torque
Torque range
No load speed (RPM)
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm-
ful interference to radio communications. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference at his own expense.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Standard bolt
High tensile bolt
DTDA040 DTDA070
M5 - M10 M5 - M12 (3/16" - 1/2")
(3/16" - 3/8")
M5 - M8 M5 - M10 (3/16" - 3/8")
(3/16" - 5/16")
35 N•m 65 N•m
(26 ft•lbs) (48 ft•lbs)
Approx. Approx.
3 - 20 N•m 5 - 40 N•m
(Approx. (Approx.
2 - 15 ft•lbs) 4 - 30 ft•lbs)
0 - 2,400 /min 0 - 2,500 /min
0 - 3,700 /min
139 mm (5-1/2")
1.1 - 1.4 kg (2.5 - 3.0 lbs)
BL1415NA / BL1430B / BL1460A
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2 ENGLISH
DTDA100 DTDA140
M6 - M16
(1/4" - 5/8")
M6- M12
(1/4" - 1/2")
95 N•m 140 N•m
(70 ft•lbs) (103 ft•lbs)
Approx. Approx.
6 - 65 N•m 18 - 80 N•m
(Approx. (Approx.
4 - 48 ft•lbs) 14 - 59 ft•lbs)
0 - 2,700 /min
0 - 3,300 /min
D.C. 14.4 V
146 mm (5-3/4")
1.2 - 1.4 kg 1.2 - 1.5 kg
(2.7 - 3.2 lbs) (2.7 - 3.2 lbs)