Oven Functions - ECG MTD 2072 SE Manual De Instrucciones

OVEN FUNCTIONS

Operating instructions
This microwave oven uses modern electronic controlling to configure cooking parameters to better meet your needs.
1. Memory
Press the button Memory to select cooking program.
2. Pause/Cancel settings
Press the Pause/Cancel button to pause a running program, press twice to cancel the program. Also used for setting the Child lock function.
3. Setting the time
Turn the dial to position Clock, turn the second dial Menu/Time/Weight to the right, press repeatedly and select 24 hour mode (Hr 24) or
12 hour mode (Hr 12).
When you select the mode, set the clock by turning the dial Menu/Time/Weight and press Start/Quick Start to confirm. Use the same
procedure to set the minutes.
4. Cooking in the microwave oven
1) Turn the dial to the desired power level.
2) Using the dial Menu/Time/Weight set the required cooking time.
3) Confirm by pressing the Start/Quick Start button and the oven will begin cooking.
Cooking power table
Functions
Low
M. Low
Med (Medium)
M. High
High
5. Quick start
Press repeatedly the button Start/Quick Start to set the cooking time, the oven starts working at full power level. The longest possible
duration that can be set in this mode is 10 minutes. After the cooking time has elapsed, you will hear a beep and the display will show END.
6. Defrosting according to weight
Defrosting time and power are set automatically after programming the weight. Weight of frozen foods range: 100–1800 g.
Example: Defrosting 600 g of shrimps.
1) Set the dial to Auto Defrost.
2) Turn the dial Menu/Time/Weight to select the weight of the food.
3) Start the defrosting process by pressing the Start/Quick Start button.
Note: During the defrosting, the cycle is paused and you hear an audio signal – rotate the food and press Start/Quick Start to continue.
7. Defrosting according to time
1) Set the dial to Speed Defrost.
2) Turn the Menu/Time/Weight wheel and set the defrost duration (maximum setting is 95 minutes).
3) Start the defrosting process by pressing the Start/Quick Start button.
8. Cooking in phases
3 different preparation phases at most can be set for cooking.
Example:
1 phase S1: a cooking time of 10 minutes for a cooking of High power.
2 phase S2: a cooking time of 8 minutes for a cooking of Medium power.
3 phase S3: a cooking time of 5 minutes for a cooking of Medium power.
1) Select 1 program phase (identical to setting the cooking options on the microwave). Press the button Memory.
2) Enter 2 program phases. Press the button Memory.
3) Enter 3 program phases.
4) Press the Start/Quick Start button.
Note: You cannot use the functions Quick start, Auto and Quick Defrost, Deodorization and Auto cooking during phase cooking.
9. Preset
This function enables running one of the pre-programmed oven cycles.
Microwave power
20%
40%
60%
80%
100%
GB
55