Idiomas disponibles
Idiomas disponibles
en
ENGLISH
14. Technical Specifications
Fig. G. We reserve the right to make technical
improvements.
U
= Voltage of battery pack
T
= Maximum material thickness in wood
1
T
= Maximum material thickness in non-
2
ferrous metals
T
= Maximum material thickness in sheet
3
steel
n
= Stroke rate at idle speed
0
m
= Weight (with smallest battery pack)
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Energy-rich, high-frequency interference can cause
fluctuations in speed and eventually standstill. The
fluctuations disappear, however, as soon as the
interference fades away.
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
ah,M
= vibration emission value
(Sawing sheet metal)
ah,B
= vibration emission value
(Sawing wood)
K
= Uncertainty (vibration)
h,...
Typical A-effective perceived sound levels:
L
= Sound pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
During operation the noise level can exceed 80
dB(A).
Wear ear protectors!
14
