Idiomas disponibles
Idiomas disponibles
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of these devices can reduce dust
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
•
KEEP GUARDS IN PLACE and in working
order.
•
REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning it on.
•
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
•
DON'T USE IN DANGEROUS
ENVIRONMENT. Don't use power tools in
damp or wet locations, or expose them to
rain. Keep work area well lighted.
•
KEEP CHILDREN AWAY. All visitors should
be kept safe distance from work area.
•
MAKE WORKSHOP KID PROOF with
padlocks, master switches, or by removing
starter keys.
•
DON'T FORCE TOOL. It will do the job
better and safer at the rate for which it was
designed.
•
USE RIGHT TOOL. Don't force tool or
attachment to do a job for which it was not
designed.
•
WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get
caught in moving parts. Nonslip footwear is
recommended. Wear protective hair covering
to contain long hair.
•
ALWAYS USE SAFETY GLASSES. Also
use face or dust mask if cutting operation is
dusty. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
•
SECURE WORK. Use clamps or a vise to
hold work when practical. It's safer than using
your hand and it frees both hands to operate
tool.
•
DON'T OVERREACH. Keep proper footing
and balance at all times.
•
MAINTAIN TOOLS WITH CARE. Keep
tools sharp and clean for best and safest
performance. Follow instructions for
Anl_TE_TC_18_115_Li_SPK7_USA.indb 8
Anl_TE_TC_18_115_Li_SPK7_USA.indb 8
EN
lubricating and changing accessories.
•
DISCONNECT TOOLS before servicing;
when changing accessories, such as blades,
bits, cutters, and the like.
•
REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in off
position before plugging in.
•
USE RECOMMENDED ACCESSORIES.
Consult the owner's manual for
recommended accessories. The use of
improper accessories may cause risk of injury
to persons.
•
NEVER STAND ON TOOL. Serious injury
could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
•
CHECK DAMAGED PARTS. Before further
use of the tool, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function – check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced.
•
DIRECTION OF FEED. Feed work into
a blade or cutter against the direction of
rotation of the blade or cutter only.
•
NEVER LEAVE TOOL RUNNING
UNATTENDED. TURN POWER OFF. Don't
leave tool until it comes to a complete stop.
5) Battery tool use and care
a) Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
b) Recharge only with the charger specifi ed
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fi re when used with another
battery pack.
c) Use power tools only with specifi cally
designated battery packs. Use of any other
battery packs may create a risk of injury and
fi re.
d) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fi re.
e) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
- 8 -
06.06.2023 09:29:18
06.06.2023 09:29:18
