Idiomas disponibles
Idiomas disponibles
necessary.
•
Rotating blade:
Avoid all contact with the rotating blade when
the machine is in operation.
•
Electrical parts:
Keep water away from electrical parts of the
tool and from persons in the work area!
•
Technical changes:
To comply with the requirements imposed
by the safety regulations, all technical
modifications which change the equipment's
characteristics (e.g. speed) must be left
strictly to the manufacturer.
•
Safety regulations:
Each time before you use the machine, make
sure that it still complies with the safety regu-
lations. For safety reasons you must replace
every damaged (cracked) tool.
•
Use of other tools:
The use of any other types of blades or tools
(such as circular saw blades) which are not
stated in the enclosed instructions is not
permitted.
•
Water level:
Make sure there is enough water in the water
container.
•
Work range:
Make sure that there is no one within the work
area apart from the operator.
This equipment is not intended to be used
by persons (including children) with reduced
physical, sensory or mental capacities or those
with a lack of experience and/or knowledge.
Children must always be supervised to ensure
that they do not play with the equipment.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Miter stop
2. Rip fence
3. Blade guard
4. Cutting table
5. Water container
6. Water container cover
7. Blade safety guard
8. Blade guard hex. bolt
9. Blade guard lock knob
10. Fastening clasp
11. Water drain plug
Anl_TE_TC_18_115_Li_SPK7_USA.indb 12
Anl_TE_TC_18_115_Li_SPK7_USA.indb 12
EN
12. On/Off switch
13. Fastening screw for splitter
14. Turbo diamond blade
15. Outer fl ange
16. Scale
17. Housing
18. Splitter
19. Ring spanner
20. Counter holder
21. Battery safety cover catch
22. Battery safety cover
23. Battery mount
24. Battery (not supplied)
25. Pushlock button
26. Battery capacity indicator
27. Battery capacity indicator button
28. Nut
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Blade guard with splitter
•
Turbo diamond blade
•
Rip fence
•
Miter stop
•
2x Ring spanner / counter holder
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
- 12 -
06.06.2023 09:29:19
06.06.2023 09:29:19
