Idiomas disponibles
Idiomas disponibles
POWER--
2
fi
_,:L30
ooq_
-MONO
TUNER
- BAND
- SHIFT
m
2
1
MULTI
JOG
<II_PRESET-
==CLEAR
I i
...................
!
o o ol
0
.
-0-9,+10
- BAND
- SHIFT
z
O
<
I
2
Press TUNER BAND repeatedly
to select the
desired band.
When TUNER BAND is pressed while the power is off, the
power is turned on directly.
To select a band with the remote control
Press BAND while pressing
SHIFT.
Press <1< DOWN or _
UP to select a station.
Each time the button is pressed,
the frequency
changes.
When a station is received, "TUNE" is displayed
for 2 seconds.
During
FM stereo reception,
{(_®_11is displayed.
[1_@)11
TUNE
The unit can store a total of 32 preset stations. When a station
is
stored, a preset number is assigned
to the station.
Use the preset
number to tune in to a preset station
directly.
1 Press TUNER BAND to select a band, and press
<I<1 DOWN or _
UP to select a ,'station.
2 Press
II
SET to store
the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
To search for a station quickly (Auto Search)
Keep _
DOWN or _
UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press <t<1 DOWN or _
UP.
• The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press MONOTUNER on the remote control while pressing SHIFT
so that "MONO" appears on the display.
MONO
Noise is reduced, although reception is monaural.
To restore stereo reception, press these buttons so that "MONO"
disappears.
To change
the AM tuning
interval
The default
setting
of the AM tuning interval is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is 9 kHz/step,
change
the tuning
interval.
Press POWER
while pressing
TUNER
BAND.
To reset the interval,
repeat this procedure.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already
been stored.
PRESET
NUMBER TLINING
Use the remote control to select the preset
number directly.
1 Press BAND while
pressing
SHIFT to select
a
band.
2 Press numbered buttons 0-9 and +10 to select a
preset number,
Example:
To select preset
number 20, press +10, +10 and 0.
To select preset
number
15, press +10 and 5.
Selecting
a preset
number
on the main unit
Press TUNER BAND to select a band.1;hen,
press <11_ PRESET
repeatedly
or turn MULTI JOG.
Each time ,<11_ PRESET
is pressed, the next ascending
number
is selected.
To clear a preset
station
Select the preset number of the station to be cleared. Then, press
[] CLEAR,
and press II SET within 4 seconds.
The preset numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
ENGLISH
8
