Idiomas disponibles
Idiomas disponibles
P,ECORDING
This section explains how to record from the tuner, CD player, or
external equipment.
2
3
II
Preparation
• Use Type ]: (normal)
tapes only.
• Set the tape to the point where recording
will start.
• Note that recording
is done on only one side of the tape.
1 Insert the tape to be recorded
on into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
EJECT
2 Press function
(CD, TUNER, VIDEO/AUX
or MD)
and prepare the source to be recorded.
To record from
a CD press CD and load the disc(s).
To record from
a radio broadcast
press TUNER
and tune
in to a station.
To record
from
a connected
source
press VIDEO/AUX
or
MD.
3 Press •
REC/REC MUTE to start recording.
INSERTING
BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER,
VIDEO/AUX or MD.)
1 Press •
REC/REC MUTE during recording or while in
recording pause mode.
ITt-=M on the display flashes for 4 seconds and 4-second blank
space is made. Then, the deck enters the recording pause
mode.
2 Press II to resume recording.
To insert a blank space of less than 4 seconds
press •
REC/REC MUTE again while ITt-=Mis flashing.
To insert blank spaces of more than 4 seconds after the deck
enters recording pause mode, press •
REC/REC MUTE again.
Each time the button is pressed, a 4-second blank space is added.
About
cassette
tapes
• To prevent
accidental
erasure,
break off the plastic tabs
on the cassette
tape after recording
with a screwdriver
or
other pointed tool.
Side A ____.__
.!.ab
for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
• 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recemmended.
• Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
I=
When
the selected
function
is CD, playback
and recording
start simultaneously.
When
recording
from a connected
source,
start playback
of
the source.
To stop recording, press I.
To pause recording, press II. (Applicable when the source is
TUNER, VIDEO/AUX or MD) To resume recording, press it again.
Sound
adjustment
during
recording
The output
volume
and tone
(except
BBE) of the speakers
or
headphones
are freely
varied without
affecting
the level of the
recording.
To erase
a recording
Make sure the microphone
is not connected
to this unit.
1
Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display "TP 2".
2 Set the tape to the point where the erasu_re is to be started.
3
Press •
RISC/REC
MUTE to start the erasure.
ENGLISH
"12
