Idiomas disponibles
Idiomas disponibles
CD DIGITAL OUT
(OPTICAL)
• .- VIDEO/AUX
--MD
--
LINE OUT
SUPER
WOOFERS
SURROUND
SPEAKERS
Refer to the operating
instructions
of the connected
equipment
for details.
• The connecting
cords are not supplied.
Obtain
the necessary
connecting
cords.
• Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AUX
JACKS,
MD JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phone plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L jack.
When connecting
a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
LINE OUT JACKS
This unit can output
analog sound signal through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
with LINE IN (analog
input) jacks.
Do not connect
an equipment
to the LINE OUT terminals
and
VIDEO/AUX
terminals
simultaneously.
Otherwise,
noise
is
generated
and malfunction
occurs.
CD DIGITAL OUT (OPTICAL)
JACK
This unit can output CD digital
sound signals through this jack.
Use an optical cable to connect
digital audio equipment
(DAT
deck, MD recorder, etc.).
Remove the dust cap (_ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect
an optical cable plug to the CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL)
jack is not being used
Attach the supplied
dust cap.
SURROUND
SPEAKERS
_ JACKS
Connect optional
surround
speakers
with the 8 ohms to 16 ohms
impedance
to the jacks.
SUPER
WOOFERS
=3 JACKS
Connect
optional powered
sub woofers with built-in-amplifiers
to the jacks.
POWER----
VIDEO/AUX --
MD
--
!
To play equipment
connected
to the VlDEO/AUX
or MD jacks
proceed
as follows.
Press
VIDEO/AUX
or MD.
When a equipment
connected
t:o the VIDEO/AUX
jacks
is
played:
press VIDEO/AUX.
When a equipment
connected
to the MD jacks is played:
press MD.
2 Play the ,connected equipment.
To change
a source
name
in the display
When
VIDEO/AUX
is pressed,
"VIDEO"
is displayed
initially. It
can be changed
to "AUX" or "TV".
With the power on, press POWER
while pressing
VIDEO/AUX.
Repeat the procedure
to select one of the names.
To adjust
the sound
leve_ of the external
source
When the sound
level of the external
source is much higher or
much lower than that of other function sources,
adjust it as follows.
1 Press VIDEO/AUX
or MD and play the equipment.
2
Press <1<1 or I_1_ so that the sound level becomes
the same
as that of other function
sources.
During recording,
the sound level can not be adjusted.
ENGLISH
20
ili
._1
O
Z
O
W
Z
I-
0
