Bosch EasyGrassCut 18V-230 Manual Original página 15

Mounting and Operation
Action
Product features
Delivery scope
Removing the transport safety
Connecting the shaft
Adjusting the handle
Mounting the protection guard
Battery charging and inserting
Switching On and Off
Switching from lawn trimming/
edge cutting
Removing the line spool
Winding line on spool
Mounting the line spool
Line feeding
Maintenance, Cleaning and Stor-
age
Accessories
Assembly
Caution: Switch the garden tool off and remove the
u
battery before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (9).
Connect the individual parts of the shaft until they can be
heard to engage.
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
the adjustment, press buttons (7) and move the handle to
the desired position. Release the buttons (7) again so that
the handle can engage.
Mounting the protection guard (see figure F)
In order to protect the plants, pull the bracket from the deliv-
ery position to the storage position before mounting the pro-
tection guard.
Position the protection guard (8) on the trimmer head and
fasten it with the provided screw.
Do not disassemble guard once connected.
Then pull the bracket into the working position to protect the
plants.
Switching on
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
Bosch Power Tools
The cutting line continues to rotate for a few seconds
u
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
Figure
Page
Do not touch cutting line before the rotating cutting
u
A 229
line stops.
B 230
Do not briefly switch off and on again several times in
u
C 230
a row.
D 231
Only use Bosch approved cutting elements. Cutting
u
performance will vary with different cutting elements.
E 231
F 232
Inserting/Removing the Battery (see figure G)
G 233
Note: Using unsuitable batteries can lead to malfunctions or
H 233
damage the machine.
Insert the charged battery (6). Ensure the battery is inserted
I 234
correctly.
To remove the battery (6) from the machine, press the bat-
J 235
tery unlocking button (5) and pull the battery out.
K 235
L 236
Operation
M 236
Switching On and Off (see figure H)
N 237
To switch on, firstly press the lock-off button (3). Then
O 238
press the On/Off switch (4) and keep it pressed.
To switch off, release the On/Off switch (4).
Lawn Trimming/Edge Cutting (see figure I)
Turn the handle against the shaft by 180° to position the
trimmer head either for lawn trimming or edge cutting. Re-
lease button (2) so that the turning mechanism engages.
Now, turn the complete machine to the working position.
Lawn trimming
Move the trimmer left and right, keeping it well away from
the body. Cut higher grass in steps.
Edge cutting
Guide the trimmer along the edge of the lawn. Avoid contact
with solid surfaces or walls to prevent rapid wear of the cut-
ting line.
Cutting around trees, plants and bushes
To prevent damage, carefully cut around trees, plants and
bushes so that they do not come into contact with the cut-
ting line.
Dismounting the spool, winding up the cutting
line and mounting the spool (see figures J to L)
Remove the battery before replacing the spool.
u
Press both latches of the spool cover together and remove
the spool cover (11). Afterwards, remove the empty spool
(12).
Cut off approx. 4.0 m line from the refill roll. Slide one end of
the cutting line into the hole for line wind-up (13) in the
spool and wind up the cutting line uniformly and tightly.
Slide the other end of the cutting line through the hole for
line guiding (14) in the trimmer head and mount the spool
back into the trimmer head. Affix the spool by mounting the
spool cover (11).
English | 15
F 016 L94 725 | (12.10.2023)