Idiomas disponibles
Idiomas disponibles
Information codes
Code symbol
Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Oven vent blocked.
Solution
1. Tap Stop, and then restart the
oven.
2. If the problem persists, disconnect
all power to the oven range for
at least 30 seconds and then
reconnect the power.
1. If oven vent or cover air is
blocked by aluminum foil
or others, remove that and
restart oven.
2. To reset error, disconnect
power or tap 'Stop' after
opening the oven door at
least 60 seconds.
Code symbol
Meaning
Gas leakage in the gas
connection section.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Solution
1. Disconnect power. Open the
back cover. Check there are
signs of combustion in the gas
connection section.
2. If there are signs of
combustion, replace GPR
and TCO and check the gas
leakage.
3. If there are no signs of
combustion, check wire-TCO,
Wire main - sub connection
status and PBA S/W version.
English 53
