EA24B, EA24D
8.2
Saving energy
• Only open the beverage center as often and for as long as necessary.
• Allow warm drinks to cool down first before placing it in the device to keep cool.
• Defrost the beverage center as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, ensure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
• Do not line shelves with aluminum foil, wax paper or paper towels, as they
prevent proper air circulation.
8.3
Locking/unlocking the device (EA24B only)
A
NOTICE! Damage hazard
Ensure the key is fully inserted into the keyhole before rotating it.
➤ Insert the key into the lock and rotate it as follows:
➤ Clockwise: Lock the device.
➤ Counter-clockwise: Unlock the device.
8.4
Switching the device on/off
➤ Press the on/off button for 6 seconds to switch the device on or off.
I
NOTE
After switching on the device needs some time before the compressor
starts.
➤ Check the device for leaks after switching it on for the first time.
EN
Operation
25