Idiomas disponibles
Idiomas disponibles
controlled with the switch is dangerous and must be repaired.
Disconnect battery pack from LED UPLIGHT or place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the LED UPLIGHT.
preventive safety measures reduce the risk of starting the up light accidentally.
Store idle LED UPLIGHTs out of reach of children and other untrained persons. Up lights are
dangerous in the hands of untrained users.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
Use up lights only with specifically designated battery packs. Use of any other battery packs may create
a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
lead unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion. NOTE The temperature „130 °C" can be replaced by the temperature
„265 °F".
Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Maintain labels and nameplates.
Have your LED UPLIGHT serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the up light is maintained.
Never service damage battery packs. Service of damage battery packs should only be performed by the
manufacturer or authorised service providers.
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
SYMBOL
V
A
Hz
W
～
d.c.
lbs
kg
1English1
SERVICE
SYMBOLS
NAME
Volts
Amperes
Hertz
Watt
Class II Construction
Alternating Current
Direct Current
Pounds
Kilograms
English
EXPLANATION
Voltage (potential)
Current
Frequency
Power
Double insulated
Type of Current
Type of Current IEC60417.5031(2002.10)
Weight
Weight
-3
Such
