Idiomas disponibles
Idiomas disponibles
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged BATTERY packs. Service of BATTERY packs should
only be performed by the manufacturer or authorized service providers.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
CAUTION
Hold the power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring or its own cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
Be aware that this tool is always in an operating condition, because it does not have to be plugged
into an electrical outlet. Always set the trigger switch to the locked OFF position when installing or
removing the battery pack or bits.
Do not use bits or sockets larger than those recommended. Large bits or drills may overload the
wrench/driver and damage the motor and gears.
Do not use if chuck jaws or other parts are cracked or worn.
Never change direction of rotation until motor has completely stopped.
Never hold work in your hand, lap, or against other parts of your body when driving.
Do not use drill as a router or try to elongate or enlarge holes by twisting the drill bit. Drill bits may
break and cause injury.
Keep hands away from rotating parts.
Keep drill bit clear of yourself and all objects while installing and removing bit.
Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, all safety information available from
your material supplier.
Do not stare at operation lamp.
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
SYMBOL
V
n
o
kg
d.c.
.../min
rpm
1English1
SPECIFIC SAFETY RULES AND SYMBOLS
NAME
Volts
No Load Speed
Kilograms
Direct Current
Revolutions per
Minute
Revolutions per
Minute
SYMBOLS
EXPLANATION
Voltage (potential)
No-load Rotational Speed
Weight
Type of Current IEC60417.5031(2002.10)
Revolutions, Surface Speed, Strokes, etc.
per Minute
Revolutions, Surface Speed, Strokes, etc.
per Minute
English
-5
