Idiomas disponibles
Idiomas disponibles
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (2).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
CAUTION
INSTALL THE METAL HOOK
Before install the metal hook, follow the procedure as shown below.
1. Align the holes of metal hook to the tool housing.
2. Use screws to fasten the metal hook to the tool housing.
1English1
A
B
Fig. 3
Fig. 4
Always set switch (5) to off position when installing and removing socket.
English
-9
