Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Additional Information
Troubleshooting
After trying the methods below, if the problem persists,
contact your nearest Sony dealer.
No picture (screen not lit), no sound
/ Make sure the power cord is connected
securely.
/ Check to see if the TV/VIDEO setting is
correct: when watching TV, set to TV, and
when watching video tapes, set to VIDEO.
(pages 19, 21)
/ Before you use the projection TV, cable box
or DBS receiver, make sure to press the
corresponding FUNCTION button on the
remote commander. (pages 19, 41)
/ Try another channel. It could be station
trouble.
Poor or no picture (screen lit), good sound
/Adjust PICTURE in the VIDEO menu. (page
23)
/ Adjust BRIGHT in the VIDEO menu. (page
23)
/ Adjust the convergence. (page 16)
/ Check antenna/cable connections. (page 6)
Good picture, no sound
/ Press MUTING so that "MUTING"
disappears from the screen. (page 20)
/ Check the MTS setting in the AUDIO menu.
(page 27)
/ Make sure SPEAKER is set to ON in the
AUDIO menu. (page 27)
No color
/ Adjust COLOR in the VIDEO menu. (page
23)
/ Confirm that a black and white program is
not being broadcast.
Only snow and noise appear on the screen
/ Check the CABLE setting in the SET UP
menu. (page 16)
/ Check the antenna/cable connections.
(page 6)
/ Make sure the channel is broadcasting
programs.
Dotted lines or stripes
/Adjust the antenna.
/Move the projection TV away from noise
sources such as cars, neon signs, and hair-
dryers.
Double images or ghosts
/Use a highly directional outdoor antenna
or a cable (when the problem is caused by
reflections from nearby mountains or tall
buildings.)
Cannot operate menu
/If the item you want to choose appears in
grey, you cannot select it. Press TV/VIDEO
correctly.
/Check the CABLE setting in the SET UP
menu. (page 16)
Cannot receive upper channels (UHF) when
using an antenna
/Check if CABLE is OFF in the SET UP
menu. (page 16)
/ Use AUTO PROGRAM to add receivable
channels that are not presently in the
memory. (page 17)
Cannot receive any channels when using cable
TV
/ Check if CABLE is ON in the SET UP
menu. (page 16)
/ Use AUTO PROGRAM to add receivable
channels that are not presently in the
memory. (pages 17)
Remote commander does not operate
/ Battery could be weak. Replace the
battery. (page 13)
/ Make sure the projection TV's power cord
is connected securely to wall outlet.
/ Press TV FUNCTION when operating your
projection TV.
/ Are fluorescent lights too close to the
projection TV? Move lights at least 3 – 4
feet away from the projection TV.
Additional Information
EN
(continued)
43
-EN
Tabla de contenido
