The Information Menu - Sony VPL-X2000U Manual De Instalación

There are three menus in the SERVICE MODE:
INFORMATION, SERVICE SETTING, and W/B
ADJUST menus.

The INFORMATION Menu

The INFORMATION menu shows the information
about the current input signal and the number of
operated hours of the projector and lamp.
S INFORMATION
fH: 1 5 . 7 kHz
fV: 1 2 0 . 0 Hz
SYNC: CPOS/–/–
ROM VER: 1 . 0 0
OPERATION TIMER: 0 1 2 3 4 h
LAMP TIMER1: 0 1 2 3 4 h
LAMP TIMER2: 0 1 2 3 4 h
LAMP TIMER3: 0 1 2 3 4 h
LAMP TIMER4: 0 1 2 3 4 h
fH (Horizontal frequency)
Indicates the horizontal frequency of the input signal.
The value is not absolute but is only used as a
reference.
fV (Vertical frequency)
Indicates the vertical frequency of the input signal.
The value is not absolute but is only used as a
reference.
SYNC
Indicates the type and the polarity of the sync signal.
The indications show the polarity of the composite or
horizontal sync signal, vertical sync signal and sync on
G signal from the left to the right.
CPOS: The polarity of the composite sync signal is
positive.
CNEG: The polarity of the composite sync signal is
negative.
POS: The polarity of the sync signal is positive.
NEG: The polarity of the sync signal is negative.
SonG: Sync on green signal
– : No sync signal is input.
VIDEO
ROM VER.
Indicates the ROM version number of the projector.
OPERATION TIMER
Indicates the total number of hours for which the
projector has been operated.
LAMP TIMER 1–4
Indicates the total number of hours for which the lamp
currently used has been operated.
The number of hours of the lamp that has burnt out is
indicated in red.
59
(GB)