Idiomas disponibles
Idiomas disponibles
REF. 53056
EN
INSTRUCTION MANUAL
SPECIFICATIONS
9 pressure adaptors
External diameter: 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84mm
3 cylinders
External diameter: 76, 86, 91mm
Internal diameter: 69.5, 75.5, 83mm
1 screw
Length: 295mm
6 hub screws
M12x1.5 (3 PCS), M14x1.5 (3 PCS)
BEARING EXTRACTION
Choose a cylinder (2) with a diameter higher than the
bearing.
Choose a pressure adaptor (3) with a diameter smaller
than the steering knuckle, but big enough to push the
bearing.
To extract the bearing, install the tool as shown below:
Keep the screw fixed in this end:
Screw in the screw in this end:
As you screw, the pressure adaptor will push the bea-
ring to make it fall off the steering knuckle.
Once the bearing is completely extracted, it will fall into
the cylinder.
PARTS LIST
4
5
12
2
1
BEARING INSTALLATION
Choose a pressure adaptor (3) with a diameter sma-
ller than the steering knuckle, but enough to push the
bearing.
To install the bearing, install the tool as shown below:
Keep the screw fixed in this end:
Screw in the screw in this end:
As you screw, the pressure adaptor will push the bea-
ring to insert it into the steering knuckle.
9
NUM
1
2
3
4
3
4
· 3 ·
DESCRIPTION
Screw
Cylinders
Pressure adaptors
Hub screw
