Idiomas disponibles
Idiomas disponibles
4. Getting Started
Observe the information in the operating instructions of the device to be
charged. If no explicit instructions are provided, proceed as described below.
* Ensure that the charger, the connection cable and the end device are
compatible while they are not connected to the power supply.
* Plug the device to be charged into the charger. The device to be charged
should be switched off.
* Plug the charger into an appropriate electrical socket/cigarette lighter socket.
* The switched-off end device will now be charged.
5. Troubleshooting
A connected end device will not
©
charge.
The charger becomes extremely
hot and switches off the charging
process after a period of time.
Check whether your end device
requires a charger with a special
©
pin assignment and whether the
charging current of the charger is
sufficient. This information can be
found in the manual for your end
device, or you may contact the
manufacturer's customer service
department.
Your end device reguires a
higher charging current than the
charger can provide. The charger
automatically switches off the
charging process to prevent damage
to the charger.
©
25.04.14
12:4
