Direct Call - Topcom Butler 4056 Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Butler 4056/4056C
Press the Up or Down key
Enter the number (max. 5 digits) to be barred, e.g. 01486.
Press the Programming key
'HS _ _ _ _ _' (= number on the handset (1-5)) '01486' (= the barred numbers) appear on
the display.
Enter the numbers of the handsets from which the barred numbers cannot be called.
e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with '01486'.
Press the Programming key
Repeat the same procedure described above if you would like to bar other numbers
(max. 5)!

4.28 DIRECT CALL

By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.
4.28.1 To program the Direct Call number
Press the Programming key
Press the Up or Down key
Press the Programming key
If necessary, delete the existing number by pressing the Delete-key a few times
Enter the direct number
Press the Programming key
4.28.2 Turn the Direct Call function ON/OFF
To turn it ON:
Press the Programming key
Press the Up or Down key
Press the mute-key
'DIRECT ON' appears on the display
To turn if OFF:
-
Quick press the Programming key
4.29 DEFAULT SETTINGS (RESET) OF THE PARAMETERS
You can reset the standard (default) settings in the telephone. You need the PIN code to do
this.
The default settings are:
Keypad:
Key clicks:
Speaker volume:
Ringer melody:
Ringer volume :
Selection base unit:
Flash time:
To restore the default settings, do the following:
Butler 4056/4056C
to select one of the 5 memories.
.
to confirm your selection.
until 'DIRECT' appears on the display
until 'DIRECT' appears on the display
for 2s
twice
not locked
active
level
1
5
automatic
100ms
21
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Butler 4056c

Tabla de contenido