Structure Of The User Web Interface; Using The User Web Interface; Exporting Charging Statistics; Specifying A Time Server - Mennekes AMEDIO Professional 22 Manual De Instrucciones Y De Instalación

7.3.2 Structure of the user web interface

1
6
Fig. 21: Structure of the user web interface for firm-
ware version 5.22 (example)
1 Menu
2 Parameter
3 Note / information *
4 Setting / status
5 Language selection button
6 Button to reset and save the changed settings
and restart the product
The notes / information (3) contain a great
deal of important information that provides
tips on the respective parameter.

7.3.3 Using the user web interface

Settings can be made in the "Dashboard" menu.
This is where the current operating values are indic-
ated and where the charging statistics can be
downloaded. Settings can be made in the remain-
ing menus.
u Configure the product according to your prefer-
ences.
After the product has been fully configured,
a restart is required.
u Click the "Restart" button to restart the
product.
40
5
3
2 4

7.3.4 Exporting charging statistics

In the "Dashboard" menu, the charging statistics
can be exported in the CSV format.
u Click the "Download" button under "Download
Session Report:".
Requirement(s):
ü A time server is specified.
1 "7.3.5 Specifying a time server" [} 40]

7.3.5 Specifying a time server

A valid time is required for some functions (e. g. to
export charging statistics or for making manual set-
tings for solar charging). For these purposes, a time
server must be specified.
Requirement(s):
ü The product has been connected to the net-
work via an internet capable router.
ü The router is permanently connected to the in-
ternet.
u Navigate to the menu "Network" > "NTP" and
make the following parameter settings:
Parameter
NTP client
NTP server 1 configura-
tion
Additional time servers can be entered if necessary.
They are called upon if the connection to the first
time server is interrupted.

7.3.6 Whitelist management

Programming RFID cards
u Navigate to the menu "Whitelists" > "Add entry".
u Hold the RFID card in front of the RFID card
reader to transmit the UID of the RFID. Alternat-
ively, the RFID UID can be entered manually.
Setting
u Select "On".
u Enter the URL of the
time server, e. g.
n ntp.elinc.de
n ptbtime1.ptb.de