Idiomas disponibles
Idiomas disponibles
INSTALLATION
INSTRUCTIONS
Unpacking
and Examining
Your Microwave
Oven
Remove all packing
materials
from inside the
microwave
oven cavity;
however,
DO NOT
REMOVE
THE WAVEGUIDE
COVER, which
is located
on the
top
cavity
wall,
Read
enclosures
and SAVE the
Installation/Use
and Care Manual.
Check the microwave
oven for any damage,
such as misaligned
or bent
door, damaged
door
seals and sealing
surfaces,
broken
or
loose
door
hinges
and latches
and dents
inside
the cavity
or on the door.
If there
is
door
latches
Hinges
cover
any damage, do not operate the microwave oven and contact your dealer or
VIKING AUTHORIZED SERVICER.
Choosing
a Location
for Your Microwave
Oven
on the
Counter
You will use the microwave
oven frequently
so plan its location
for ease of use.
It's wise, if possible,
to have counter
space on at least one side of the micro-
wave oven.
Allow
at least 2 inches
on the
sides, top and at the rear of the microwave
oven for air circulation.
Choosing
a Location
for Your
Built-in
Microwave
Oven
Your microwave
oven
can be built
into
a
cabinet
or wall by itself
or above
an oven,
To install a microwave
oven above a built-in
oven, the applicable
trim kits are as follows:
VIKING
Professional
Series:
• For installation
with an electric
27" wide
single
oven
(VESO176
/ VESO177)
use
built-in
trim kit VMTK275SS.
Built-in Trim Kit
Frame Assembly
Microwave
oven Front
• For installation
with an electric
30" wide single oven (VESO105
/ VESO107)
use built-in
trim kit VMTK305SS.
• For installation
with a gas (VGS0166)
or electric
(VES0165)
36" wide single
oven use built-in
trim kit VMTK365SS.
Do not build
in above
any other
gas or electric
oven.
