Idiomas disponibles
Idiomas disponibles
Interior- after convection, m ix or broil cooking
Spatters
may occur
because
of moisture
and grease.
Wash immediately
after
use with
hot, soapy
water.
Rinse and polish
dry. Harder
to remove
spatters
may occur
if oven
is not thoroughly
cleaned
or if there
is long
time/high
temperature
cooking.
If so, you may wish to purchase
an oven
cleaner
pad
with liquid
cleaner
within
it--not
a soap filled
steel pad--for
use on stainless
or porcelain
surfaces.
Follow
manufacturer's
directions
carefully
and
be
especially
cautious
not to get any of the liquid
cleaner
in the perforations
on
the wall or ceiling
or any door surfaces.
Rinse thoroughly
and polish dry.
After
cleaning
the
interior
thoroughly,
residual
grease
may
be removed
from the interior
ducts and heater by simply operating
the oven on 450T
for
20 minutes
without
food. Ventilate
the room
if necessary.
Waveguide
Cover
The waveguide
cover
is made
from mica so requires
special
care. Keep the
waveguide
cover
clean to assure good
microwave
oven
performance.
Care-
fully wipe
with a damp
cloth any food
spatters
from the surface
of the cover
immediately
after they occur. Built-up
splashes
may overheat
and cause smoke
or possibly
catch fire. Do not remove
the waveguide
cover.
Odor
Removal
Occasionally,
a cooking
odor may remain
in the microwave
oven. To remove,
combine
1 cup water,
grated
peel and juice
of 1 lemon
and several
whole
cloves
in a 2-cup
glass measuring
cup, Boil for several
minutes
using
100%
power.
Allow
to set in microwave
oven
until cool.
Wipe
interior
with
a soft
cloth.
Turntable/Turntable
Support/Racks
The turntable,
turntable
support
and racks can be removed
for easy cleaning.
Wash them
in mild, sudsy water; for stubborn
stains use a mild cleanser
and a
non-abrasive
scouring
sponge.
They are also dishwasher-proof.
Use top rack
of dishwasher
for turntable
support.
Foods with high acidity,
such as tomatoes
or lemons,
will cause the porcelain
enamel
turntable
to discolor,
Do not cook highly acidic
foods
directly
on the
turntable;
if spills occur, wipe up immediately.
The turntable
motor
shaft is not sealed, so excess water or spills should
not be
allowed
to stand in this area.
36
