Idiomas disponibles
Idiomas disponibles
3.1
Remove the hanger ball by loosening the Phillips head
setscrew in the hanger ball until the ball falls freely down
the 4.5" downrod (Figure 1).
Remove the pin from the 4.5" downrod, then remove the
hanger ball (Figure 1).
Retain the pin and hanger ball for reinstallation in
Step 3.14.
3.2
Separate, untwist and unkink the three 80" motor leads.
Route the three motor leads through the 4.5" downrod
(Figure 2).
3.3
Remove the fan assembly from the protective plastic bag.
Place the fan assembly into the upper foam pad with the
top of the motor facing up.
Loosen the two Phillips head setscrews in the motor
coupler for installation of the downrod (Figure 3).
Seat the downrod in the motor coupler (Figure 3).
Rotate and align the downrod holes with all the holes in the
motor coupler (Figure 3).
All manuals and user guides at all-guides.com
3. Ceiling Fan Assembly
Figure 1
Figure 2
LOOSEN
PHILLIPS HEAD
SETSCREWS (2)
Figure 3
5
GREEN GROUND WIRE
PIN
4.5" DOWNROD
HANGER BALL
PHILLIPS HEAD SETSCREW
(LOOSENED)
THREE 80" MOTOR LEADS (UNTWISTED)
4.5" DOWNROD
Please contact 1-800-654-3545 for further assistance
4.5"
DOWNROD
MOTOR
COUPLING
emersonfans.com
U.L. Model No.: CF135
