Idiomas disponibles
Idiomas disponibles
4. Switch Cover Assembly Only
This Ceiling Fan can be Installed Without the Light Kit.
If you would like to Install your Fan Without a Light Kit,
Please Follow the Below Instructions of Section 4.
Skip to Section 5 if you Wish to Install the Light Kit Assembly on Your Ceiling Fan.
If the Light Kit Assembly is Already Assembled to the Fan, and You Want to Remove it, Reverse Section 5
Assembly Instructions to Uninstall the Light Kit Assembly and Then Follow Section 4 Instructions to
Disassemble the Light Kit Fitter from the Switch Cover.
4.1
Locate the light kit assembly and place it on a padded work
surface. Position it so that the wires are visible (Figure 14).
The light kit consists of two major components:
1. Switch Cover Assembly
2. Light Fitter Assembly
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse or circuit breaker box before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
4.2
Locate and remove the small orange wire connectors from
the blue and black wires (labeled "For Light Kit
Connection") and from the two white wires (labeled "For
Light Kit Connection") (Figure 15).
Retain the wire connectors for future use.
All manuals and user guides at all-guides.com
SWITCH COVER
ASSEMBLY
Figure 14
Figure 15
10
LIGHT KIT
ASSEMBLY
LIGHT FITTER ASSEMBLY
WIRE
CONNECTORS (2)
U.L. Model No.: CF135
