Idiomas disponibles
Idiomas disponibles
8.1
Screw the studs into the threaded holes on the bottom of
the hanger bracket with your fingers (Figure 42).
8.2
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 43).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied in parts bag). (Figure 43).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the ceiling
cover is clear of the downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and not
pinched between the ceiling cover and the ceiling.
WARNING
!
To avoid possible fire or shock, make sure that antenna
wire is not pinched between the ceiling cover and the
ceiling.
All manuals and user guides at all-guides.com
8. Ceiling Cover Installation
23
Figure 42
RECEIVER
ANTENNA
WIRE
Figure 43
Please contact 1-800-654-3545 for further assistance
HANGER BRACKET
THREADED STUDS (2)
emersonfans.com
U.L. Model No.: CF135
