Operating Guide; Prepare The Remote Transmitter - Petsafe PDT20-11738 Instrucciones De Uso Y Manual De Adiestramiento

Prepare the Remote Transmitter

Step
1
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect the charger connector to the Remote
Transmitter Charging Jack.
3. Plug the Universal Charging Adapter into a standard
household electrical socket, using the appropriate
Adapter plug.
4. Charge the Remote Transmitter for 24 hours for the
first charge. Recharges take only 12 hours.
Note: The Transmitter Indicator Light is solid after 12
hours of charging. For the first charge, continue to charge
the Remote Transmitter for an additional 12 hours.
5. When charging is completed, replace the
rubber cover.
Note: Approximate battery life between charges is 40 to 50 hours, depending on frequency of use.
Transmitter Indicator Light - Function and Response
Remote Transmitter Function
Transmitter being charged for up to 12 hours
Transmitter being charged for more than 12 hours
Any button being pressed - good battery
Any button being pressed - low battery
Any button pressed for tone or spray correction Solid in Colour
Transmitter Function and Tones
Remote Transmitter Function
Side button
Top button
Lower button

Operating Guide

www.petsafe.net
Charger connector placed
in the Remote Transmitter
Charging Jack
Indicator Light Response
Flashes
Solid in Colour
Solid in Colour
Flashes once per 1/2 second
Tones
Good tone
Negative tone
Spray Correction set by Intensity Dial
5