Idiomas disponibles
Idiomas disponibles
Observe the manufacturer's dosing quantity recom-
mendations when dosing with detergent or care
agents.
To prevent foaming, fill the fresh water tank with wa-
ter first and the add the detergent or care agent.
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
Fault
The LED display indica-
tor "Robot status" flash-
es red
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
Warranty
The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
EU Declaration of Conformity
Device Type
Frequency
band, MHz
RCF 3
WLAN
2400-2483.5
Alfred Kärcher GmbH & Co. KG hereby declares that
the radio device type Robo Cleaner complies with the
2014/53/EU directive. The full text of the EU Declaration
of Conformity can be found at www.kaercher.com/RCF
3.
Technical data
Electrical connection
Nominal power
Nominal voltage of battery
Battery pack type
Nominal voltage of charger
Rated current charger
Battery capacity
Rechargeable battery nominal ca-
pacity
24
Troubleshooting guide
Cause
The battery is discharged.
The cleaning robot is to be switched off
and is standing on the charging station.
The fresh water tank is not sitting proper-
ly in the device.
The cleaning roller is not fitted properly in
the device.
The cleaning roller is caught or blocked. 1. Remove the cleaning roller and insert it
Power, max.
EIRP
100
RCF 3
W
36
V
14,4
Li-ION
V
100-240
A
0,8
mAh
4800
mAh
5200
To prevent the tank from overflowing, be sure to
leave enough space for the detergent or care agent
when filling with water.
Replacing the cleaning roller
A worn cleaning roller can worsen the cleaning result.
1. Check the cleaning roller regularly for wear and re-
place if necessary.
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Rectification
1. Charge the battery.
1. Switch off the cleaning robot when it is not
on the charging station
1. Remove the fresh water tank and then fit it
back in place. Insert the fresh water tank so
that it is firmly fitted in the device.
1. Fit the cleaning roller correctly in the de-
vice.
correctly into the device.
Operating time in Sensitive mode
when battery fully charged
Wireless connections
Frequency
Max. signal strength, WLAN
Water tank filling quantities
Fresh water tank capacity
Waste water tank capacity
Dimensions and weights of cleaning robot
Weight
Length x width x height
Dimensions and weights of charging station
Weight
Length x width x height
Subject to technical modifications.
English
RCF 3
min
125
WLAN
IEEE
802.11b/
g/n 2.4
GHz
MHz
2400-
2483.5
dBm
<20
ml
430
ml
115
kg
4,5
mm
340 x
340x
120
kg
0,4
mm
142 x
153 x
124
