Water Connection; Servicing Of A Double-Insulated Appliance - Bosch Universal Aquatak 1900 Instrucciones De Funcionamiento Y Seguridad

After stopping the motor, always pull the
trigger on the trigger handle to relieve
stored pressure in the high pressure hose.
Failure to do so could result in serious per-
sonal injury.
All current-conducting components in the
working area must be protected against
splashed water. The addition of water in-
creases the risk of electric shock.
Do not alter or misuse pressure washer.
Any alteration or modification is a misuse and
may result in serious personal injury.

Water Connection

Comply with the regulations of your water supply company.
All connecting hoses must have properly
sealed joints. Water leaks can create addi-
tional electrical hazards.
Make sure that the supply hose is at least
1/2" in diameter and is reinforced.
The appliance should never be used on the
drinking water supply without a back flow
valve.
The high-pressure hose must not be dam-
aged (danger of bursting). A damaged high-
pressure hose can burst resulting in injury and
property damage. Only use hoses and con-
nections recommended by the manufacturer.
Never use the pressure washer without the
filter or with a dirty or damaged filter. Using
the pressure washer without a filter or with a
dirty or damaged filter may invalidate the war-
ranty.
4
F016L81610 1900.indd 4
General Safety Rules
Have your pressure washer serviced by a
qualified repair person using only identi-
cal replacement parts. This will ensure that
the proper operation of the pressure washer
is maintained.
This pressure washer is double insulated.
In a double-insulated product, two systems
of insulation are provided instead of ground-
ing. No grounding means is provided on a
double-insulated product, nor should a means
for grounding be added to the product. Ser- vicing a double-insulated product requires
extreme care and knowledge of the system,
and should be done only by qualified service
personnel. Replacement parts for a double-in-
sulated product must be identical to the parts
they replace.
A double-insulated product is marked with the
words "DOUblE INSUlATION" or "DOUblE
INSUlATED" . The symbol
the product.
SAFETY IS A COMbINATION OF OPERA-
TOR COMMON SENSE AND AlERTNESS
AT All TIMES WHEN THE PRESSURE
WASHER IS bEING USED.
Before each use, review all warnings
SAVE THESE INSTRUCTIONS
Service
Servicing of a Double-
Insulated Appliance
A
0
THINK SAFETy
located on the pressure washer.
may also be on
5/3/17 9:06 AM