Bosch Universal Aquatak 1900 Instrucciones De Funcionamiento Y Seguridad página 10

Connecting and Disconnecting
Pressure Hose
Insert one end of the pressure hose 4 (both
ends are identical) into the pressure outlet 15
of the pressure washer unit until it clicks. In-
sert the other end of the pressure hose into
the pressure inlet 7 of the trigger handle 6 until
it clicks (Fig. 6).
To release the pressure hose 4 from the wash-
er unit, push on the red pressure hose release
lever 15a with one hand and pull out the hose
with the other hand.(Fig. 6).
To release the pressure hose 4 from the trig-
ger handle 6, push on the red pressure hose
release lever 7a with one hand and pull out
the hose with the other hand (Fig. 6).
Connecting and Disconnecting
Water Supply Hose
1. Attach the water filter 12 to the inlet on the
front of the pressure washer and finger
tighten clockwise to ensure a watertight
seal (Fig. 7).
2. Attach the garden hose (not included) to
the hose adapter 13. Push the hose adapter
onto the water filter 12 until it clicks in place
(Fig. 7).
3. Connect the supply hose to the outdoor
home water faucet (Fig. 7).
To disconnect the garden hose from the pres-
sure washer, pull on the collar of the hose
adapter 13 until it disengages from the water
filter 12 (Fig. 7).
Fig. 7
10
F016L81610 1900.indd 10
Fig. 6
4
13
GARDEN HOSE
(NOT INCLUDED)
15
6
7a
4 7
12
1
15a
5/3/17 9:06 AM