Makita LC1230 Manual De Instrucciones página 9

Number
Part No.
of teeth
A-90532 60
A-90722 60
A-90875 78
A-90847 78
006943
CAUTION:
Always use carbide-tipped saw blades appropriate
•
for your job. Do not cut aluminum, wood, plastics,
concrete, tiles, etc.
Carbide-tipped saw blades for metal cutting saw
•
are not to be re-sharpened.
application
Angles
Mild Steel 5/32" or more
Mild Steel
(Lessened 5/32" or more
Noise Type)
Thin Mild
1/8"-15/64"
Steel
Stainless
1/8"-15/64"
Steel
Applicable workpiece & thickness range
Pipes Channels
1/8"-13/64" 5/32" or more
1/8"-13/64" 5/32" or more
3/64"-13/64" 5/64" or more
3/64"-13/64" 5/32" or more
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period
of ONE YEAR from the date of original purchase.
Should any trouble develop during this one year period,
return the COMPLETE tool, freight prepaid, to one of
Makita's Factory or Authorized Service Centers. If
inspection shows the trouble is caused by defective
workmanship or material, Makita will repair (or at our
option, replace) without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
repairs are required because of normal wear and
tear:
the tool has been abused, misused or improperly
maintained:
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES FROM THE SALE OR USE OF THE
PRODUCT. THIS DISCLAIMER APPLIES BOTH
DURING AND AFTER
WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES
OF "MERCHANTABILITY" AND "FITNESS FOR A
SPECIFIC PURPOSE," AFTER THE ONE YEAR TERM
OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not
apply to you.
EN0006-1
9
Stainless Stainless
Pipes Angles
NA NA
NA NA
NA NA
3/64"-13/64" 1/8"-5/32"
(NA.......Not applicable)
THE TERM OF THIS