Replacing The Batteries; Technical Data - SOMFY Easy Sun io Manual Del Usuario

Symbol
For all other alerts, contact the installer.

7.2 Replacing the batteries

Never use rechargeable batteries.
When replacing the batteries, all the programmed settings are stored with no time limit.
If the remote control is not used for prolonged periods of time, it is recommended that the batteries
be removed.
- Open the Easy Sun io by lifting the cover; no tools are
required for this operation.
- Insert 2 new 1.5 V AA alkaline batteries (LR6), observing
the correct polarity.
-

8. TECHNICAL DATA

which searches for an unoccupied radio frequency prior to transmitting.
Range: 20 m through 2 concrete walls, 40 m with a Repeater io.
Protection rating: IP 30.
Safety level: Class III.
Operating temperature: 0°C to +60°C.
Dimensions of the Easy Sun io in mm (h x w x d): 165 x 45 x 22.
Dimension of the wall bracket in mm (h x w): 77 x 29.
Power supply: 2 AA (LR6) 1.5 V batteries.
Maximum number of linked io receivers or motors: 15.
Maximum number of linked io wind sensors: 3.
Maximum number of linked io sun sensors: 1.
Please separate the storage cells and batteries from other types of waste and recycle them
via your local collection facility.
Copyright © 2009-2011 Somfy SAS. All rights reserved.
Alert
Replace the sensor's batteries: refer to the relevant operating guide
Sun sensor
For the Sunis WireFree™ io, see the section
batteries low
WireFree™ io batteries
Wind sensor
Replace the sensor's batteries: refer to the relevant operating guide.
batteries low
Order
Another control point is sending an order to the motor or receiver.
interrupted
Explanation
«
»
.
Easy Sun io
Replacing the Sunis
11