Screen; Installation; Attaching The Wall Mount; Replacing Batteries - SOMFY Impresario Chronis io Guia De Instalacion

8.6.

Screen

The screen display can be set to constant or temporary.
When the screen is set to constant, the display is permanently lit.
When the screen is set to temporary, the display stays lit for 3 minutes then goes into standby.
Choose the selected option with (
9.

INSTaLLaTIoN

9.1. attaching the wall mount

9.1.1. Choosing a location for the wall mount
Choose an accessible location where it is easy to see and
use.
The wall mount must be installed in a location that is
within radio range of all of the products to control. To
ensure this, run a scenario from the location where you
plan to install the wall mount.
This test can easily be performed:
n
Use the (
) buttons to select a preset scenario. Run the
a
scenario with (
Make sure that all of the products have received the orders.
9.1.2. Procedure for attaching the wall mount
Attach the wall mount to the wall using the two screws
supplied. Attach it at a convenient height for reading the
display.
10.

REPLaCING BaTTERIES

A low battery condition is shown on-screen by the (
While replacing batteries, the current date and time are retained in the memory for two minutes.
All other programmed settings remain saved for an unlimited duration.
Never use rechargeable batteries.
Copyright © 2009 Somfy SAS. All rights reserved.
5015149B00_ImpresarioChronis_io.indb 15
) and confirm by pressing (ok).
i
).
Menu
p
) symbol.
Impresario Chronis io
15
30/03/10 15:01:25